HD MediaBridge Coax Network Starter Kit
The D-Link HD MediaBridge Coax Network Starter Kit (DXN-221) is a simple solution for enabling network access by utilizing your home’s existing coaxial (cable) wiring. The HD MediaBridge kit includes two HD MediaBridge Coax Network Adapters (DXN-220), each with an Ethernet port and a coaxial connector to easily connect to available coaxial outlets.
The HD MediaBridge Coax Adapter is a Coax-to-Ethernet bridge and comes with one Coax F-type connector and one Ethernet RJ-45 connector. Simply connect one HD MediaBridge Coax Adapter to a router using the provided Ethernet cable to establish a network connection and to an available coaxial outlet in the room to access your home’s coaxial wiring. Then add the second HD MediaBridge Coax Adapter in another room to connect a PC or other Ethernet-ready device (such as Game Consoles, Media Players, Blu-ray Disc Players, etc.) to the network. For rooms with multiple Ethernet-devices, simply connect a switch to the HD MediaBridge Coax Adapter to network additional devices. If your router has Internet access, then all devices connected using the HD MediaBridge Coax Adapter can share Internet access as well. Additional HD MediaBridge Coax Adapters can be added to bridge additional rooms. Ship Status: On Order
$210.96 |
C3230 Card Bundle with (1) 2.4GHz WMIC , (1) 4.9GHz WMIC
The Cisco Wireless Mobile Interface Card (WMIC) is a Cisco 3200 Series router interface card in a standard PC/104-Plus form factor. It is one component of the Cisco 3200 Series routers and provides a wireless interface with the following: 2.4GHz (802.11b/g) - Cisco 3201; 4.9 GHz (public safety) - Cisco 3202 (the 4.9 GHz [public safety] radio requires an operators license and can be operated only by US Public Safety operators who meet the requirements specified under FCC Part 90.20.)
The ISA buses and PCI buses on the Cisco 3200 Series router cards provide power to the components on the cards. The WMIC does not receive or transmit communications signals on either bus, but it will pass signals through the bus to a card above or below the WMIC. Both buses comply with the PC/104-Plus standard. The PCI bus signals allow the Cisco cards to communicate. Non-Cisco cards cannot communicate with the Cisco 3200 Series Router cards over the PCI bus. In a Cisco Rugged Enclosure, the WMIC communicates with the router through the WMIC Fast Ethernet interface. The WMIC Fast Ethernet ports are connected internally to Fast Ethernet ports that provide a communications link with the router. The WMIC interfaces are configured through a WMIC console port.
This is a Cisco 3230 bundle with (1) 2.4-GHz WMIC for North America and (1) 4.9-GHz WMIC for the United States. Ship Status: On Order
$2,954.99 |
4X DDR InfiniBand Mezzanine NIC
The HP 4X DDR IB Mezzanine HCA is a single-port 4X DDR InfiniBand PCI-Express Mezzanine adapter for HP c-Class server blades. The HP 4X DDR IB Mezzanine HCA can be plugged into PCI-Express connectors on HP c-Class server blades. Ship Status: On Order
$719.00 |