The APC Dry Contact I/O Accessory provides a hardware interface for connecting the host device of a Network Management Card 2 (AP9631 or AP9635, available separately) with peripheral devices. The Dry Contact I/O Accessory includes: Inputs (labeled Zones A and B) for two dry contact devices; One 12V, 25mA power output (labeled Pwr); One Form C relay (relay outputs labeled Output).
Dry Contact I/O Accessories connect to Universal I/O ports on your Management Card 2: AP9635 includes one port and AP9631 includes two ports. Through your Management Card 2 software interface, you specify which alarms will cause a change in the state of the Form C relay. You also set the actions that will occur at the host due to a change in state of your dry contact devices.
|
General
|
|
|
Color
|
Black
|
|
Actual Weight
|
0.11 lb(s)
|
|
Compatibility Notes
|
Compatible with all APC SmartSlot UPSs, including Smart-UPS and Symmetra units
|
|
Contents
|
Unit, ethernet cable, documentation
|
|
Physical Dimensions
|
0.9"h x 1.8"w x 1.8"d
|
|
Power Notes
|
Input voltage: 24VDC
Current draw: 40mA DC
Output: 12VDC, 25mA
Form C relay ratings
Normal switching capacity: 1A at 30VDC
Maximum switching power: 30W
Maximum switching voltage: 60VDC
Maximum switching current: 2A (dc)
Maximum carrying current: 2A (dc)
Surge ratings: 2kV per Bellcore; TA-NWT-001089; 1.5 kV per FCC part 68
Note: The Form C relay is not intended to switch AC loads directly
|
|
Warranty - Labor
|
Call for Warranty
|
|
Warranty - Parts
|
Call for Warranty
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=10541273#BVSecondaryCustomerRatings