- Provides 2200VA, 1600watt(s), 230VA power / Surge Suppression is Standard
- 5 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online, RJ-11 line protection, RJ-45 line protection
The Tripp Lite SUINT2200RTXL2UA is a 2200VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. This online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts battery output back to completely regulated, filtered AC output. It operates continuously without using battery power during brownouts to 130V and overvoltages to 275V, and it is highly efficient in its optional Economy Mode setting, saving BTU heat output and energy costs.
The UPS provides network-grade AC surge and noise suppression with zero transfer time between AC and battery operation. The network management interfaces support simultaneous communications via USB port, DB9 serial port and an optional SNMPWEBCARD in the available card slot. The HID-compliant USB interface enables integration with the built-in power management and auto shutdown features of Windows and Mac OS X. Simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces is supported.
Also included is Tripp Lite's PowerAlert monitoring software and complete cabling. Other features include: Emergency Power Off (EPO) interface; integrated 2-bank PDU switching that supports load shedding and remote-reboot of connected equipment; 3-stage metered current monitoring and battery charge status LEDs. The LED display panel easily rotates for better viewing in rackmount or tower configurations. You also benefit from dataline surge suppression for your dialup, DSL or network Ethernet connections.
4-post rackmount accessories are included. The 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories are available separately. High availability UPS features include automatic inverter bypass and Hot-swappable batteries. Green and High Efficiency features are economy mode of operation, individually controllable load banks and schedulable daily hours of the economy mode of operation.
|
General
|
|
|
Attributes
|
Double conversion online
|
|
Attributes
|
RJ-11 line protection
|
|
Attributes
|
RJ-45 line protection
|
|
Form Factor
|
Tower
|
|
Form Factor
|
2U Rackmount
|
|
Power
|
|
|
Power Provided
|
2200 VA
|
|
Power Provided
|
1600 watt(s)
|
|
Power Provided
|
230 VA
|
|
Surge Suppression
|
Standard
|
|
Battery Run Time (max)
|
5 minute(s)
|
|
Actual Weight
|
47.50 lb(s)
|
|
Compatibility Notes
|
LEDS ALARMS & SWITCHES
LED Indicators: (14) LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in rack/tower formats
Alarms: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation: Power-fail alarm can be silenced using alarm-cancel switch
Switches: (2) Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression rating: 660 joules
UPS AC suppression response time: Instantaneous
EMI / RFI AC noise suppression: Yes
PHYSICAL
Installation form factors supported with included accessories: 4-post 19-inch rackmount (mounting rail kit included)
Installation form factors supported with optional accessories: 2-post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
Primary form factor: Rackmount
COMMUNICATIONS
Communications interface: USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port description: Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications
PowerAlert software: Included
Communications cable: USB and DB9 cabling included
WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time: No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to battery power (setpoint): 160V (100% load), 130V ( <70% load)
High voltage transfer to battery power (setpoint): 275V
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure): Cold-start operation supported
High availability UPS features: Automatic inverter bypass; Hot swappable batteries
Green & high efficiency features: High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy mode operation
CERTIFICATIONS
UPS Certifications: Tested to CE (EU); Tested to SASO (Saudi Arabia)
UPS Certification details: Kuwait
|
|
Contents
|
UPS, PowerAlert software, USB and serial cabling, 4-post rack mounting hardware, (1) C19 to C20 and (2) C13 to C14 power cables, documentation
|
|
Physical Dimensions
|
3.5"h x 17.5"w x 19"d
|
|
Ports/Connectors
|
Built-in UPS output receptacles: (4) C13, (2) C19 outlets
Included output power cables: (2) C13 to C14, (1) C20 to C19 output power cables
Built-in controllable switched load banks: Two switchable single-outlet C19 load banks
UPS input connection type: C20 inlet
UPS input connection description: C20 inlet accepts user-supplied AC power cord with country specific plug
Basic PDU options: PDUNV (1U / 2 C19, 12 C13 outlets)
Metered PDU options: PDUMV20HV (0U / 6 C19, 32 C13 outlets)
Switched PDU options: PDUMH20HVNET (1U / 8 C13 outlets); PDUMV20HVNET (0U / 4 C19, 24 C13 outlets)
PDU recommendation notes: All noted SWITCHED and METERED PDUs require C19 to C20 input cable (P036-006 or similar)
NOTE: PDU options and cabling are available separately.
|
|
Power Notes
|
OUTPUT
Output capacity: 2200VA/1600W
Output power factor: 0.7
Crest Factor 3:1
Nominal Output Voltages Supported: 200, 220, 230, 240VAC
Nominal Voltage default: 230VAC
Frequency compatibility: 50/60Hz
Frequency compatibility details: Output frequency matches input nominal on startup, defaults to 50Hz on cold-start
Output voltage regulation (line mode): +/- 3%
Output voltage regulation (Economy line mode): +/- 10%
Output voltage regulation (Battery mode): +/- 3%
Output AC waveform (AC mode): Sine wave
Output AC waveform (battery mode): Sine wave
INPUT
Rated input current (at maximum load): 9.7A (200V), 9.3A (208V), 8.8A (220V), 8.5A (230V), 8.1A (240V)
Nominal Input Voltages Supported: 200V AC; 220V AC; 230V AC; 240V AC
Input circuit breaker: 15A
BATTERY
Full load runtime (minutes) 5 min. (1600w)
Half load runtime (minutes) 14 min. (800w)
Expandable battery runtime Supports extended runtime with optional external battery packs
External battery pack compatibility BP48V24-2U (limit 1); BP48V60RT3U (multi-pack compatible)
DC system voltage 48V DC
Battery recharge rate (included batteries) Less than 6 hours from 10% to 80%
Replacement battery cartridge (internal UPS battery replacement) RBC94-2U
Battery Access Front panel battery access door
Battery replacement description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Online, double-conversion power conditioning
Overvoltage correction 3% output voltage regulation during overvoltages to 275
Undervoltage correction 3% output voltage regulation during undervoltages to 156
Severe undervoltage correction 3% output voltage regulation during undervoltages to 130 (under 70% load only)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
2 Years
|
|
Warranty - Parts
|
2 Years
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=10657866#BVSecondaryCustomerRatings