- Intel 2.8GHz Xeon 6C X5660 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 4GB installed RAM / Technology is DDR3 SDRAM / 384GB maximum / 12MB installed cache / 0GB Hot-swap hard drive
- No Operating System Installed / 2U Rackmount / Supports Gigabit Ethernet Networking
The HP ProLiant DL380 G7 Server continues to deliver on its heritage of engineering excellence with increased flexibility and performance, enterprise-class uptime and HP Insight Control manageability, 2 socket Intel Xeon performance, and 2U density for a variety of applications.
|
General
|
|
|
Chassis Form Factor
|
2U Rackmount
|
|
Memory
|
|
|
Cache Memory (installed)
|
12 MB
|
|
RAM (installed)
|
4 GB
|
|
RAM (max)
|
384 GB
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
DVD-RW
|
|
Processor
|
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Processor Manufacturer
|
Intel
|
|
Processor Model Number
|
X5660
|
|
Processor Speed
|
2.8 GHz
|
|
Processor Type
|
Xeon 6C
|
|
Processor Upgradability
|
Upgradable
|
|
Chipset Type
|
Intel 5520
|
|
Data Bus Speed
|
1333 MHz
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller RAID Level
|
RAID 1+0
|
|
Storage Controller RAID Level
|
RAID 0
|
|
Storage Controller RAID Level
|
RAID 5
|
|
Storage Controller RAID Level
|
RAID 5+0
|
|
Storage Controller RAID Level
|
RAID 1
|
|
Storage Controller Type
|
SAS
|
|
Storage Controller Type
|
SATA
|
|
Storage Controller Type
|
Smart Array P410i
|
|
Floppy Type
|
No Floppy Drive
|
|
Hard Drive Capacity
|
0 GB
|
|
Hard Drive Interface
|
Serial Attach SCSI (SAS)
|
|
Hard Drive Interface
|
SATA
|
|
Hard Drive Type
|
Hot-swap
|
|
Video
|
|
|
External Resolution (max)
|
1600 x 1200
|
|
Video Card
|
ATI ES1000
|
|
Video RAM (installed)
|
64 MB
|
|
Video Slot Type
|
PCI Express 2.0 x16
|
|
Actual Weight
|
60.00 lb(s)
|
|
Compatibility Notes
|
Processor: Intel Xeon Processor X5660 (2.80GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 6, 5, 4, 3, 2, and 1 cores active.
|
|
Contents
|
System unit, documentation
|
|
Memory Notes
|
4GB PC3-10600R DDR3 1333MHz Registered DIMMs, expandable to 384GB using 32GB PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 slots.
There are 18 memory slots. One is occupied by a removable 4GB module, the others are available.
Some Memory notes:
For servers with eighteen (18) memory slots:
- There are three (3) channels per processor; six (6) channels per server
- There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
- Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
- Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting 1.5V operations
Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 593339-B21 - PCC Item# 11264706 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 604504-B21 - PCC Item# 11265186 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500662-B21 - PCC Item# 9793852 - 8GB PC3-10600 240-pin DDR3 SDRAM RDIMM Kit
Mfr. Part# 604506-B21 - PCC Item# 11265194 - 8GB PC3-10600 DDR3 SDRAM Upgrade Kit
Video memory: 64MB
|
|
O/S Notes
|
There is no operating system pre-installed. Operating systems supported include:
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris
VMware
Citrix XenServer
|
|
Physical Dimensions
|
3.4"h x 17.5"w x 27.3""d
|
|
Ports/Connectors
|
Expansion slots: The system board has (2) PCI connectors but up to (6) total slots can be achieved with the addition of 2 riser cards.
Expansion bays total(free): 8(8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives
Optional second drive cage for additional (8) SFF drive bays NOT AVAILABLE with the installed Optical Drive option
Storage Controller: HP Smart Array P410i/512MB FBWC Controller (RAID 0/1/1+0/5/5+0)
I/O:
(1) Serial
(1) Mouse
(1) Graphics
(1) Keyboard
(2) VGA (1 front)
(4) RJ-45
(1) iLO 2 remote management port
(1) SD Slot
(5) USB 2.0 (2 front, 2 back, 1 internal)
|
|
Power Notes
|
Power Supply: (2) 460W, Hot plug power supplies
Input Voltage Range (Vrms): 100 to 240
Frequency Range (Nominal) (Hz): 50/60
Server Power Cords:
High voltage power cord ships standard with all part numbers.
NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cords (227099-001) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU 6-foot C-14 to C13 power cord (142258-001). Also available: 110 volt 6-Foot NEMA 5-15p to C13 (AF556A PCC item# 7208461).
System Fans: Fully redundant hot plug fans ship standard (N+1). One processor models include four fans. Two processor models include six fans.
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
| Description |
Availability |
Unit Price |
|
|
|
Call for Availability
|
$659.00
|
Qty:
8534710
|
|
|
|
Call for Availability
|
$1,082.00
|
Qty:
9212991
|
|
|
|
Call for Availability
|
$2,090.64
|
Qty:
5214446
|
|
|
|
Call for Availability
|
$764.00
|
Qty:
13558484
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=12590520#BVSecondaryCustomerRatings