CableIQ is a bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
CableIQ's powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level - reducing problem escalation by up to 30%.
|
Protocols
|
|
|
Networking Protocol
|
VoIP
|
|
Networking Protocol
|
Ethernet
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Networking Protocol
|
Fast Ethernet
|
|
Actual Weight
|
1.20 lb(s)
|
|
Compatibility Notes
|
Cable types supported:
UTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification autotests:
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported tests:
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
Wiremap:
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Find fault:
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results storage:
Up to 250 qualification test results
|
|
Contents
|
CableIQ, remote adapter, IntelliTone 200 Probe, (6) remote office IDs, (2) RJ45-RJ45 patch cord, USB cable, coax "F" push-on adapter, 75-ohm coax patch cord, carrying case, AA batteries, documentation
|
|
Physical Dimensions
|
7"h x 3.5"w x 1.75"d
|
|
Power Notes
|
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use, without backlight
Other battery types supported:
4AA photo lithium, NIHM, NICAD
|
|
Returns Policy
|
Due to manufacturer restrictions, all sales for this item are final. Customers can contact Fluke directly at 1-800-283-5853.This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5656800#BVSecondaryCustomerRatings