- Provides maximum modularity for flexible deployment options
- Supports modular Gigabit Ethernet optics for deployment flexibility
- Conforms to standards-based Gigabit Ethernet implementation for compatibility and interoperability
- Ethernet 1000Base-LH, Ethernet 1000Base-LX Cabling
- Supports IEEE 802.1Q, IEEE 802.3z, IEEE 802.2, Gigabit Ethernet Networking
- Data Transfer Speeds up to 1Gbps
This Gigabit Ethernet Half-Height Line Card for the Cisco uBR10012 Universal Broadband Router is designed to meet cable operator demands to deploy Gigabit Ethernet technology, as well as address increasing needs for modularity and density. The line card offers an IEEE 802.3z-compliant Ethernet interface that can run up to 1 Gbps in full-duplex mode. The card uses a Small Form-Factor Pluggable (SFP) gigabit interface converter (GBIC) module that supports a variety of Gigabit Ethernet interface types (SX, LX/LH, and ZX) which operators can change or upgrade at any time.
|
Connectivity
|
|
|
Cabling Type
|
Ethernet 1000Base-LH
|
|
Cabling Type
|
Ethernet 1000Base-LX
|
|
Performance
|
|
|
Data Transfer Rate
|
1 Gbps
|
|
Protocols
|
|
|
Networking Protocol
|
IEEE 802.1Q
|
|
Networking Protocol
|
IEEE 802.3z
|
|
Networking Protocol
|
IEEE 802.2
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Actual Weight
|
2.00 lb(s)
|
|
Compatibility Notes
|
Environmental conditions:
- Storage temperature: -38 to 150F (-40 to 70C)
- Operating temperature, nominal: 41 to 104F (5 to 40C)
- Operating temperature, short term: 23 to 131F (-5 to 55C)
- Storage relative humidity: 5 to 95 percent relative humidity (RH)
- Operating humidity, nominal: 5 to 85 percent RH
- Operating humidity, short term: 5 to 90 percent RH
- Operating altitude: -60 to 4000m
Electromagnetic Emissions Certification:
- AS/NZ 3548:1995 (including Amd I + II) Class B
- EN55022:1998 Class B
- CISPR 22:1997
- EN55022:1994 (including Amd I + II)
- 47 CFR Part 15:2000 (FCC) Class B
- VCCI V-3/01.4 Class 2
- CNS-13438:1997 Class B
- GR1089:1997 (including Rev1: 1999)
Immunity:
- EN300386:2000-TNE EMC requirements; product family standard; high priority of service; headend and distribution hub locations
- EN50082-1:1992/1997
- EN50082-2:1995-Generic Immunity Standard, Heavy Industrial
- CISPR24:1997
- EN55024:1998-Generic ITE Immunity Standard
- EN61000-4-2:1995+AMD I + II-ESD, Level 4, 8-kV contact, 15-kV air
- IEC-1000-4-3:1995+AMD 1-Radiated Immunity, 10V/m
- IEC-1000-4-4:1995-Electrical Fast Transients, Level 4, 4 kV/B
- IEC-1000-4-5:1995+AMD 1-DC Surge Class 3; AC Surge Class 4
- EN61000-4-6:1996+AMD 1-RF Conducted Immunity, 10V rms
- EN61000-4-11:1995-Voltage Dips and Sags
- ETS300 132-2:1996+corregendum, Dec. 1996
- GR1089:1997 (including Rev1: 1999)
Network Equipment Building Systems:
- Level 3 compliant
- Bellcore SR-3580 Criteria Levels, issued November 1995
- GR1089-Core: Electromagnetic Compatibility and Electrical Safety, issued December 1997
- GR63-Core: Physical Protection Requirements, issued October 1995
- SBC equipment requirements: TP76200 MP and TP76400 MP
- Verizon equipment requirements: SIT.NEBS.TE.NPI.2000.004 Rev.
|
|
Contents
|
Transceiver, documentation
|
|
Physical Dimensions
|
7.8"h x 1.3"w x 11"d
|
|
Returns Policy
|
Due to manufacturer restrictions, all sales on this item are final.
|
|
System Requirements
|
Hardware Requirements:
- Chassis-The Cisco Gigabit Ethernet Half-Height Line Card is supported in the Cisco uBR10012 Universal Broadband Router.
- Performance routing engines (PREs)-The line card is supported with the Cisco uBR10012 Performance Routing Engine 2.
- Line cards-The line card is supported with Cisco broadband processing engines on the Cisco uBR10012.
- Carrier-The Cisco uBR10012 Gigabit Ethernet Half-Height Line Card requires a carrier (part number ESR-HH-CARRIER) for compatibility with the Cisco uBR10012. For more information about the carrier, refer to that component's data sheet.
|
|
Warranty - Labor
|
90 Days
|
|
Warranty - Parts
|
90 Days
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6087346#BVSecondaryCustomerRatings