- Intel 5000P chipset supports 2 compatible processors
- Up to 32GB DDR2 SDRAM
- Extended ATX form factor
The Supermicro X7DB8-X motherboard features the Intel 5000P chipset and provides dual independent buses at 1066 and 1333MHz to support two Dual-Core Intel Xeon processors 5000 series for unprecedented performance in a DP server platform. The two buses can deliver an aggregated throughput of as much as 17GB/second at 1066MHz and up to 21GB/second at 1333MHz. With an independent bus for each processor, next-generation Intel server platforms can deliver higher throughput for intensive computing workloads, compared to platforms based on the 64-bit Intel Xeon processor 3.60GHz and Intel 7525 chipset.
|
General
|
|
|
Mainboard Type
|
Server
|
|
Motherboard Form Factor
|
Extended ATX
|
|
Memory
|
|
|
Cache Memory (installed)
|
0 MB
|
|
RAM (installed)
|
0 GB
|
|
RAM (max)
|
32 GB
|
|
RAM Technology
|
DDR2 SDRAM
|
|
Processor
|
|
|
Chipset Type
|
Intel 5000P
|
|
Compatible Processors
|
Xeon Dual Core
|
|
# Processors Installed
|
0
|
|
# Processors Supported
|
2
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller Type
|
Ultra320 SCSI
|
|
Storage Controller Type
|
RAID
|
|
Storage Controller Type
|
IDE/ATA
|
|
Storage Controller Type
|
SATA
|
|
Video
|
|
|
Video Card
|
ATI ES1000
|
|
Video RAM (installed)
|
16 MB
|
|
Compatibility Notes
|
Dual 771-pin LGA Sockets
Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
Dual-Core Intel Xeon Processor 5000 sequence (Dempsey processor) with 2MB L2 Integrated Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz
System Bus: 1333 / 1066 / 667 MHz system bus
Chassis ( Optimized for X7DB8-X ):
2U Chassis SC825S2-R700LPV
SC825S2-560LP
SC823S-550LP
3U Chassis
SC836S2-R800V
SC833S2-R760
SC833S-R760
SC833S2-550
SC833S-550
SC933S1-R760
SC933S2-R760
Tower / 4U Rackmount
SC745S2-R800
SC745S2-700
SC743S2-R760
SC743S1-R760
SC743S2-650
SC743S1-650
SC743S1-645 (FAN-0091 Required)
|
|
Contents
|
Motherboard, cables, I/O shield, software CD, documentation
|
|
Memory Notes
|
0GB DDR2 667/533MHz ECC FB-DIMM memory up to 32GB. There are eight (8) 240-pin DIMM sockets.
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported
Video memory: 16MB
|
|
O/S Notes
|
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
|
|
Physical Dimensions
|
13.1" x 12"
|
|
Ports/Connectors
|
Expansion slots: (3) 64-bit 133MHz PCI-X (3.3V) slots, (3) 64-bit 100MHz PCI-X (3.3V) slots
On-board devices:
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot, Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Intel ESB2 SATA 3.0Gbps Controller, RAID 0, 1, 5, 10 support, six Serial ATA ports,
six SATA hard drives supported
Adaptec AIC-7902 Controller Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives) Host RAID 0, 1, & 10 support
Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR1 or AOC-LPZCR2 Optional: (Card not included) RAID 0, 1, 5, 10
Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP)
Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller, Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
ATI ES1000 controller with 16MB of video memory
Winbond 83627HG chip
Floppy controller; 1.44 MB, 2.88 MB
I/O:
(2) RJ45 LAN ports
(2) USB rear ports 2.0 Compliant / 1.1 Compliant
(3) USB internal headers (5 total USB ports) 2.0 Compliant / 1.1 Compliant
(1) VGA Port
PS/2 keyboard and mouse ports
(1) Fast UART 16550 serial port
(1) Fast UART 16550 serial header
|
|
Power Notes
|
To ensure system stability, a 550W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Power configurations:
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
Cooling:
Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
(8) fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6851261#BVSecondaryCustomerRatings