The APC Rack Automatic Transfer Switch (rack ATS) provides reliable, redundant power to single-corded equipment. The rack ATS has dual-input power cords supplying power to the connected load. If the primary power source becomes unavailable, the rack ATS will seamlessly source power from the secondary source without interrupting critical loads. This networked unit has built-in network connectivity which allows for remote management via Web, SNMP, or Telnet interfaces.
|
General
|
|
|
Product Type
|
Automatic Transfer Switch
|
|
Actual Weight
|
14.30 lb(s)
|
|
Compatibility Notes
|
Features
Dual Input Power Sources: Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternative power source.
Information Displays: Indicates the status of the AC sources powering the units, as well as indicates which source is set as the primary source and which source is currently supplying power to the load. This provides a visual depiction of the power flow from the input to the load. This allows the user to quickly glance at the power flow and status of the input sources without connecting to the unit.
|
|
Contents
|
Unit, rack mounting brackets, RS-232 configuration cable, documentation
|
|
Physical Dimensions
|
3.5"h x 17"w x 9.3"d
|
|
Ports/Connectors
|
Output Connections
(16) IEC 320-C13
(2) IEC 320-C19
Always on Outlets: (18)
Input Connections
(2) NEMA L6-30P
Cord Length 8 feet (2.44 meters)
Number of Power Cords: (2)
Communications
(1) RJ-45 Ethernet port
(1) RJ-11 Serial port
|
|
Power Notes
|
Output
Nominal Output Voltage: 200V, 208V
Maximum Total Current Draw per Phase: 30A
Input
Nominal Input Voltage: 200V, 208V
Input Frequency: 50/60Hz
Regulatory Derated Input Current (North America): 24A
Maximum Line Current per phase: 30A
Maximum Input Current per phase: 30A
|
|
Warranty - Labor
|
2 Years
|
|
Warranty - Parts
|
2 Years
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9463618#BVSecondaryCustomerRatings