- Supports IEEE 802.11a, IEEE 802.11b, IEEE 802.11g Networking
- Data Transfer Speeds up to 108Mbps
- Remote Management over HTTP, HTTPS, SNMP, Telnet
The Cisco Aironet 1230AG Series delivers the versatility, high capacity, security, and enterprise-class features required in more challenging RF environments. It is designed for wireless LANs in rugged environments or installations that require specialized antennas, and features dual antenna connectors for extended range, coverage versatility, and more flexible installation options. The Cisco Aironet 1230AG Series combines antenna versatility with industry-leading transmit power, receive sensitivity, and delay spread for high multipath and indoor environments, providing reliable performance and throughput for the most demanding requirements.
|
General
|
|
|
Color
|
Gray
|
|
Performance
|
|
|
Data Transfer Rate
|
108 Mbps
|
|
Protocols
|
|
|
Networking Protocol
|
IEEE 802.11b
|
|
Networking Protocol
|
IEEE 802.11a
|
|
Remote Management Protocol
|
Telnet
|
|
Remote Management Protocol
|
HTTP
|
|
Networking Protocol
|
IEEE 802.11g
|
|
Remote Management Protocol
|
SNMP
|
|
Remote Management Protocol
|
HTTPS
|
|
Actual Weight
|
1.70 lb(s)
|
|
Compatibility Notes
|
Dual 802.11a and 802.11g Radios: Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and compatibility with older 802.11b clients. Dual RP-TNC Antenna Connectors for Both 2.4-GHz and 5-GHz Radios: Antenna connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas, providing range and coverage versatility. Link-Role Flexibility: Autonomous access points can function as an access point or bridge, whether set up as a single-band or dual-band platform, allowing each radio to be individually configured as an access point repeater, root bridge, non-root bridge, or workgroup bridge, enabling a broad array of applications. Cisco Unified IDS/IPS: This integrated software feature is part of the Cisco Self-Defending Network and is the industry's first integrated wired and wireless security solution. When a trusted client acts maliciously, the wired IDS detects the attack and sends shun requests to Cisco WLAN controllers, which will then disassociate the client device. Management Frame Protection: This feature provides for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE. Security: WPA WPA2 (802.11i) Cisco TKIP Cisco message integrity check (MIC) IEEE 802.11 WEP keys of 40 bits and 128 bits
802.1X EAP types: EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) Protected EAP-Generic Token Card (PEAP-GTC) PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP) EAP-Transport Layer Security (EAP-TLS) EAP-Tunneled TLS (EAP-TTLS) EAP-Subscriber Identity Module (EAP-SIM) Cisco LEAP
Encryption: AES-CCMP encryption (WPA2) TKIP (WPA) Cisco TKIP WPA TKIP IEEE 802.11 WEP keys of 40 bits and 128 bits
Currently Supports 12 Non-Overlapping Channels, with Potentially up to 23 Channels: Lower potential interference with neighboring access points simplifies deployment. Fewer transmission errors deliver greater throughput. Rugged Metal Housing: Cast aluminum case and rugged features support deployment in factories, warehouses, the outdoors (in a NEMA enclosure), and other industrial environments. UL 2043 Plenum Rating and Extended Operating Temperature: Supports installation in environmental air spaces such as areas above suspended ceilings. Multipurpose and Lockable Mounting Bracket: Provides greater flexibility in installation options for site specific options, as well as theft deterrence. Both Local and Inline Power Support: Power can be supplied using the Ethernet cable, eliminating the need for costly electrical power line runs to remotely installed access points. The access points can be powered by Cisco inline power switches, single port power injectors, or local power. Hardware-Assisted AES Encryption: Provides high security without performance degradation.
|
|
Contents
|
Access point, documentation
|
|
O/S Notes
|
Cisco IOS Software Release 12.3(8)JA or later (autonomous). Cisco IOS Software Release 12.3(11)JX or later (Lightweight Mode). Cisco Unified Wireless Network Software Release 4.0 or later.
|
|
Physical Dimensions
|
1.7"h x 6.6"w x 7.2"d
|
|
Power Notes
|
Supply: 90-240VAC ±10 percent Consumption: 13W (max)
|
|
Returns Policy
|
Due to manufacturer restrictions, all sales on this item are final.
|
|
Warranty - Labor
|
90 Days
|
|
Warranty - Parts
|
90 Days
|
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=14494435#BVSecondaryCustomerRatings