Features and Benefits
Double-Conversion & Pure Sine Wave Output – The OL2200RTXL2U with Double-Conversion topology provides continuous pure sine wave output with zero transfer time by converting utility AC power to DC power and inverting it back to pure sine wave AC output. The output power is identical to or cleaner than the power from the utility company grid, free of harmonic distortion and electrical noise, resulting in optimal line clarity.
LCD Control Panel – With 43 different settings, the innovative LCD interface enables users to check UPS status, manage setup & control and run testing options. Status and log menus provide UPS vitals including input & output voltage levels, battery information, runtime estimates, load information, event and fault logging and other system information. The Configuration menu offers IT managers the ability to customize their OL2200RTXL2U UPS to their specific parameters of operation including output voltage, sync frequency, alarm settings and other parameters. The Test menu enables self testing to insure your UPS is operating correctly.
Removable LCD Control Panel – The LCD control panel on the OL2200RTXL2U can be removed and relocated for easy viewing by using a DB26 cable (sold separately) that can be attached to the front of the UPS. This feature provides easy access to view, up to 10 ft. away, status or change settings on the UPS when it's installed in a hard to reach area such as the bottom of a rack, in a crowded IT closet, or on the floor.
GreenPower UPS Eco Mode – The OL2200RTXL2U can be placed into an ECO mode that places the UPS into a bypass state with a user selectable voltage range for switching back to traditional Double-Conversion online mode. This mode improves the UPS efficiency from 90% to 93%. Cost savings are not only achieved by reducing energy consumption, but also by lowering the heat generated by the UPS.
Extended Battery Module (EBM) – The runtime of the OL2200RTXL2U can be extended by integrating additional EBM (BP72V60ART2U). The OL Series UPS can have up to ten modules added. With the easy to use LCD control panel, you can select the number of additional EBMs and it will provide the correct estimated run-time for your configuration. (For requirements beyond 10 EMBs, contact CyberPower Technical support for directions).
Fast Charge Technology – Each UPS and EBM (BP72V60ART2U) has its own built in charger that enables the UPS to recover its charge rapidly when utility power is restored. As a result, your charging time remains the same whether you add one EBM or ten modules.
Smart Battery Management (SBM) – SBM uses a 3-cycle charging mode that improves battery life and reduces heat generated. The first mode charges the battery to full, the second mode maintains the charge at max and the final mode turns the charger off and allows the battery to "rest". After a slight discharge, the UPS will restart the cycle ensuring runtimes are maintained.
PowerPanel Business Edition UPS Management Software – This software suite manages the power for all servers and computers supported by the UPS on a network. Features include application/OS shutdown, event logging (power, surge and voltage variations), hibernation mode, internal reports and analysis, as well as remote management capability for comprehensive power control.
Windows Compatibility – Our PowerPanel power management software has been fully tested and is compatible with Windows 8 32/64, Windows 7 32/64, Vista 32/64, XP 32/64, 2000, 2003, Server 2008 and Server 2012.
Linux & Virtual Machine OS Compatibility – PowerPanel power management software has been fully tested and is compatible with most mainstream brands of Linux and many of the popular versions of Virtual Machine Operating Systems such as VMware ESX / ESXi and Citrix.
Critical & Noncritical Loads – The UPS has two banks of outlets that can be configured so that the noncritical loads shut off after a set time frame to provide additional runtime for the critical load outlet. Users can prioritize their equipments runtimes to maximize the output of the UPS to meet their power requirements.
Emergency Power Off (EPO) – The EPO port can be connected to a master power switch allowing the power to be cut to the UPS in the event of an emergency.
Generator Compatible – When connected to a generator, the UPS can have the generator mode enabled so the UPS continues to receive input power, even when the generator output frequency is less than stable. The UPS will take the unstable input power and distribute it to connected equipment in pure sine wave output that is free of harmonics and distortion.
Converter Mode – With OL2200RTXL2U, IT managers have the flexibility to set the output frequency, regardless of the input frequency, to match their connected equipment by selecting a 50Hz or 60Hz output on the LCD control panel.
Multiple Language Options – The OL2200RTXL2U LCD control panel can be configured in English, Spanish and French for ease of use.
USB & Serial Connectivity – HID compliant USB port and Serial port enables full integration with built-in power management and auto shutdown features of Windows, Linux and VMware.
EMI/RFI Filters – Filters against electromagnetic interference and radio frequency interference ensuring clean power for connected equipment.
Audible Alarms – Distinctive tones identify when the unit is running on battery power, if it is overloaded, or when the battery is low.
Resettable Circuit Breakers – Convenient unit reset switch in case of an overload.
3-Year Warranty – Stringent manufacturing processes and innovative product design enables CyberPower to offer one of the strongest warranties in our industry. CyberPower will repair or replace damaged units within three (3) years of purchase date.
Technical Support – CyberPower will assist customers with any product, installation or warranty concerns.
ISO & Safety Certifications – All CyberPower manufacturing facilities are state-of-the-art and ISO-9001 Quality Tested. Our products are certified by the FCC, cUL and UL.
Input Voltage Range 60Vac - 69Vac for 0-60% Load, 70Vac - 79Vac for 0-70% Load, 80Vac - 89Vac for 0-80% Load, 90Vac - 95Vac for 0-90% Load, 96Vac - 150Vac for 0-100% Load
Input Frequency Range 40Hz-70Hz (auto-sensing)
Input Power Factor 0.99
Cold Start Yes
VA 2, 200
On Battery Voltage 100, 110, 115, 120, 125Vac (Configurable) +/- 2%
On Battery Frequency 50/60Hz (Auto-Sensing or Configurable) +/- 0.25Hz
Overload Protection Line Mode: 105~125% Load for 1 min, 126~150% Load for 10 sec, Battery Mode: 105~130% Load for 10 sec, 131~150% Load for 2 sec
Rated Power Factor 0.82
Harmonic Distortion THD < 3% at Linear Load, < 5% at Non-linear Load
Crest Factor 3:1
ECO Mode Voltage Regulation +/-10%, +/-15% (Configurable)
Bypass Internal Bypass (Automatic and Manual)
Transfer Time 0ms
Runtime at Half Load (min) 18
Runtime at Full Load (min) 6
Battery Type Sealed lead acid
Battery Size 12V/9AH
User Replaceable Yes
Hot Swappable Yes
Typical Recharge Time 5 Hours
Replacement Battery RB1290X3
Battery Quantity 6
Smart Battery Management (SMB) Mode Yes
Expandable Battery Module Option BP72V60ART2U