PC Connection Clearance Center. Shop Now!

Messages

          Transition 100MB TX to Fiber Media Converter MM LC with Power Supply

          More From: Transition Networks
          Item #: 13475401
          Mfr. Part#: E-100BTX-FX-05LC-NA
          Availability: In Stock
          Est. Ship: Ships in 24 Hours

          • Ethernet 100Base-FX Ethernet 100Base-TX Cabling
          • Supports Ethernet, Fast Ethernet Networking
          • Data Transfer Speeds up to 100Mbps

          Ordering Information

          Price:
          $242.62
           
          Transition Networks' 100BaseTX to 100BaseFX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.

          Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2,000 meters over multimode fiber, or up to 80,000 meters over single mode fiber. Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface.

          This media converter features both a 100BaseTX (RJ-45) port and a 100BaseFX 1300nm MMF SC port with a range of up to 2km.
          Collapse & Return to Top
          Compatibility Notes Features:

          AutoCross:
          AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.

          N-Way Auto-Negotiation:
          Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.

          Link Pass Through:
          Automatically detects and reports loss of link on a connection. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.

          Far End Fault Detection:
          Automatically detects faults in a link. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.

          The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.

          Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.

          Standards:
          IEEE 802.3 100BASE-FX
          100BASE-TX
          Connectivity
          Cabling Type Ethernet 100Base-FX, Ethernet 100Base-TX
          Contents Unit, documentation
          Performance
          Data Transfer Rate 100 Mbps
          Physical Dimensions 1"h x 4.7"w x 3"d
          Ports/Connectors Port 1:
          100BASE-TX (RJ-45)

          Port 2:
          100BASE-FX 1300nm SM SC (40 km)
          Power Notes Power is supplied by the chassis
          Protocols
          Networking Protocol Ethernet, Fast Ethernet
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 26121609
          Warranty - Labor Lifetime
          Warranty - Parts Lifetime
          Collapse & Return to Top

          08