Collapse & Return to Top
This 8,000VA on-line, double-conversion UPS system will provide reliable back-up power for your critical server, network and telecommunications equipment. It installs in only 6 rack spaces (3U power module and 3U battery pack) with a maximum installed rack depth of 32.5 inches. Battery runtime is expandable with the optional BP240V10-3U and BP240V32 external battery packs. Its reliable output is a full time sine wave at 200, 208, 220, 230, or 240VAC, +/-2%. This true on-line, double-conversion UPS system actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. It operates continuously without using battery power during brownouts to 156V and overvoltages to 276V.
Output is available using standard NEMA L6-30R and L6-20R output receptacles, while input power is from a standard 3-wire 208V hardwire input connection. A detachable input-output PDU module with a manual bypass switch enables hot-swap UPS replacement without disrupting connected equipment. The UPS also provides network-grade AC surge and noise suppression and zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, a contact-closure port and a slot for an optional SNMPWEBCARD. Also supported are detailed monitoring of equipment load levels, self-test data and mains power conditions. And PowerAlert monitoring software and complete cabling is also included.