Connection Clearance Center. Shop Now!

Subscribe to Our Emails


          Tripp Lite PowerVerter 1250W 120V Utility Work Truck 12VDC Inverter Charger, (2) NEMA 5-15R GFCI

          More From: Tripp Lite
          Item #: 31625732
          Mfr. Part#: UT1250UL
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Warranty:

          Ordering Information

          Tripp Lite UT1250UL Utility Work Truck Inverter/Charger is the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. It supplies up to 1250 watts of continuous 120V AC power from any 12VDC battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost inverter output feature delivers up to 200% of continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage selectable 10/40Amp charging system. In UPS mode, the UT system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling -- see owners manual for recommendations). It passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design with frequency control powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on startup. Included is the APSRM4 wired remote power switch with full status LED's, which provides remote power inverter on/off switching and continuous status information. The UT1250UL supports an unlimited amount of runtime with user-supplied batteries.

          NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 200A should be positioned no more than 18" from the UT1250UL's battery in the positive line.
          Collapse & Return to Top
          Actual Weight 23.20 lb(s)
          Compatibility Notes Features

          16.6 millisecond automatic transfer between line and battery power supports UPS protection for equipment compatible with a one cycle transfer time
          1250W continuous AC output in inverter mode, 2500W continuous AC output in AC mode
          DoubleBoost output supports momentary startup loads of up to 200% of the continuous rating for up to 10 seconds - OverPower output supports duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
          3-stage selectable 10/40 Amp battery charger with adjustable settings for wet/gel/AGM battery types
          (2) NEMA 5-15R GFCI protected outlets pass 120V line power or inverter output through to connected equipment
          3-position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
          Set of (6) front panel LED's display continuous status
          Set of (4) dip switches support wet/gel/AGM battery charging profiles, adjustable 135/145V high voltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts
          Set of (4) additional dip switches support (4) levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings
          Resettable 10A charger AC input breaker and settable 12A AC output breaker and automatic 2-speed cooling fan
          Automatic overload and thermal (overheating) shutoff
          Front panel remote control connector enables remote off/on switching with included APSRM4 remote
          Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
          Includes a battery temperature sensor with 20 foot cable to prolong battery life by adjusting the charge level based on battery temperature.
          Contents Inverter/charger, remote, battery temperature remote sensor cable, documentation
          Color Gray
          Form Factor External
          Physical Dimensions 7"h x 8.75"w x 9"d
          Power Provided 1250 watt(s)
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121006
          Warranty - Labor Other
          Warranty - Parts Other
          Warranty Details Product Warranty Period (U.S. & Canada): 30-month limited warranty
          Product Warranty Period (International): 1-year limited warranty
          Product Warranty Period (Mexico/PR): 30-month limited warranty
          Collapse & Return to Top

          Our Accessibility Policy

          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.