Collapse & Return to Top
Tripp Lite's SU80KTV (80kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU80K provides four self-contained, redundant 20kVA power modules that can be hot-swapped (with the load powered) if maintenance is required. Connect two SU80KTV models in parallel (1+1 configuration) to provide fail-safe redundancy (two 80kVA models supporting an 80kVA load) or to increase capacity (two 80kVA models supporting a 160kVA load).
The SU80KTV provides mission-critical equipment with the highest level of power protection available. This large capacity 80,000VA/64,000W UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time assures compatibility with all equipment types. The SU80KTV's high input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce less than 3% input Total Harmonic Distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal to the equipment load (1:1 ratio). Extremely efficient operation (up to 96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU-style power connections. The SU80KTV features 277/480VAC, 3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 218-348/378-603VAC. Frequency is 50 or 60 Hz (auto-selectable). The SU80KTV features a single small-footprint tower power module.
Battery runtime can be extended with optional stand-alone hardwired external battery modules (Models BP480V26B and BP480V40C with matching battery cabinets, available separately). A manual bypass breaker and an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with the included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an internal SNMP card (Model SNMPWEBCARD, available separately) for remote shutdowns, reboots and more. A front panel combination LCD/LED display alerts you to a variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed.
A 1-year limited warranty is included and a start-up service program (available separately) is recommended to enhance the reliability of the installation.